Blog
- Details
- Written by: pcmasterx
- Category: Blog
- Hits: 47
Disassembly and Reassembly of the PlayStation 1 SCPH-9002 Console
Read more: Disassembly and Reassembly of the PlayStation 1 Console
- Details
- Written by: pcmasterx
- Category: Blog
- Hits: 128
PlayStation 3 Slim (CECH-3004A) Service Manual Cleaning, Thermal Paste Application, and Assembly Guide
This manual provides step-by-step instructions to completely disassemble, clean, repaste, and reassemble your PlayStation 3 Slim console.
Read more: PlayStation 3 Slim Disassembly Guide Cleaning and Thermal Paste Replacement
- Details
- Written by: pcmasterx
- Category: Blog
- Hits: 158
Guide: Build a low-budget Home Server 2U Rackmount NAS with mainboard CW-NAS-WL
- Details
- Written by: pcmasterx
- Category: Blog
- Hits: 1377
Guide: Firmware Recovery for SM2258XT SSD Controllers
- Details
- Written by: pcmasterx
- Category: Blog
- Hits: 307
Preventative maintenance and easy cleaning of the PlayStation 5 console. In my case, I used a compressor to thoroughly blow out the dust.
Read more: How to clean a dusty PlayStation 5 quickly and easily
- Details
- Written by: pcmasterx
- Category: Blog
- Hits: 431
Updating the BIOS "flashing" on an old motherboard from the early 2000s using DOS from a floppy disk and the awdflash utility.
- Details
- Written by: pcmasterx
- Category: Blog
- Hits: 582
Sony PlayStation 3 Dualshock Wireless Controller CECHZC2E A A2 opened inside view Conductive Film Keypad Button Ribbon Flex Cable model: SA1Q222A
- Details
- Written by: pcmasterx
- Category: Blog
- Hits: 982
Opening the PlayStation 4 Pro for cleaning and maintenance requires specific tools and careful handling, and will void your warranty if it is still active. Required Tools and Materials: Screwdrivers: Phillips #0 screwdriver, TR8 or T9 Torx security screwdriver (which has a hole in the center of the bit). Prying tools: A plastic opening tool, guitar pick, or spudger to release plastic clips without causing damage. Cleaning supplies: Compressed air, a soft brush, Q-tips or cotton swabs, a microfiber cloth, and 99% isopropyl alcohol. Thermal interface materials: New thermal paste (e.g., Arctic MX4 or Thermal Grizzly Kryonaut) and new thermal pads.
Read more: PlayStation 4 Pro Opening, cleaning and replacing thermal paste